Autel MaxiIM IM608 Add New Chrysler Key

Autel MaxiIM IM608 can add new key to 2010 Chrysler Town& Country by reading Immobilizer password (CAN). Here share the related guide and Chrysler vehicle coverage supported by IM608.

Part 1: Guide to add Chrysler key by Autel IM608:

1.Connect Autel IM608 key programmer to the Chrysler via OBD

2.Enter IM608 main menu

Automatically detect VIN

Auto scan VIN

Chrysler (USA)

Loading diagnostic program

Smart Mode

3.Pay attention to the information:

-Turn the ignition on

-To execute function in “Smart Mode”, please select correct vehicle brand

-If it is old pre 2006 model, please give priority selection to “Manual Selection” or “System Selection”!

4.Select Smart key

5.Follow the prompt on the screen to switch the ignition off and then on again, make sure the engine is off

6.The password read out is 3679

7.Select Read Immobilizer Password (CAN)-> Key Learning

8.The key learning prompt will show as below, click OK to continue

If the key has learned before, it will learn failed.

9.Then follow the instruction to turn the ignition off and pull out the current key

Insert another key to be programmed, turn the ignition on, and make sure the engine has not been started

10.Learn the key 3 successfully

If you want to add more keys, you can click Yes to continue, if not, click No.

11.Finally, use the new key and original key to start the car

Leave a Reply

Your email address will not be published. Required fields are marked *