Autel AutoLink AL619 Review

Autel AutoLink AL619 is built to help you determine why the Malfunction Indicator Light or the ABS / SRS warning light is on. Featuring ABS/SRS system diagnosis, TFT color display, built-in speaker, troubleshooter code tips, the tool is truly ultimate in power and affordability.

Autel AutoLink AL619 Features:

●Reads and erases DTCs for ABS, SRS, Engine and Transmission on most 1996 and newer major vehicle models
●Works on most 1996 and newer vehicles (OBDII & CAN) – domestic and import
●Retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
●Turns off Check Engine Light (MIL), clears codes and resets monitors
●Reads, stores and plays back live PCM data stream and live sensor data
●Retrieves vehicle information (VIN, CALID and CVN)
●Views freeze frame data
●Graphs data
●TF memory card for data backup and software update
●Multilingual support – English, Spanish, French, etc.
●2.8’’ LCD with 320X240 resolution
●Internet updatable via USB
●Prints data via PC

Autel AutoLink AL619 Device Display:

1) OBD II CONNECTOR – Connects the scan tool to the vehicle’s Data Link Connector (DLC).
2) LCD DISPLAY – Indicates test results.
3) FUNCTION BUTTONS – Corresponds with “buttons” on screen for executing commands.
4) ESC BUTTON – Cancels a selection (or an action) from a menu or returns to the previous screen.
5) LEFT SCROLL BUTTON – When look up DTC definitions, moves to previous character and views additional information on previous screens if DTC definition covers more than one screen; views previous screen or previous frames of recorded data. It is also used to view previous trouble code when viewing DTCs.
6) HELP BUTTON – Provides help information and Code Breaker function.
7) DOWN SCROLL BUTTON – Moves down through menu and submenu items in menu mode. When more than one screen of data is retrieved, moves down through the current screen to next screens for additional data. When looking up DTC, it is used to change value of selected character.
8) RIGHT SCROLL BUTTON – When look up DTC definitions, moves to next character and view additional information on next screens if DTC definition covers more than one screen; views next screen or next frames of recorded data. It is also used to view next trouble code when viewing DTCs.
9) OK BUTTON – Confirms a selection (or action) from a menu.
10) UP SCROLL BUTTON – Moves up through menu and submenu items in menu mode. When more than one screen of data is retrieved, moves up through the current screen to the previous screens for additional data. When looking up DTC, it is used to change value of selected character.
11) USB CONNECTOR – Connects the scan tool to the PC for printing.
12) TF CARD SLOT – Holds the TF card